You Are Here  

Posted by Nunya

http://i.imgur.com/4yDvt.jpg

Cabinet updates  

Posted by Nunya

Cutting grooves in the front board for the control panel so it will bend with the curve of the panel.


Sanding the curve of the front of the control panel after cutting with a band saw.


The control panel is done being cut, just need to drill some holes.

Another picture of original cabinet  

Posted by Nunya


Was walking through volleyball tonight and saw an Operation Wolf cabinet, which is what my cabinet started out as, so had to take a picture.

Control panel laid out on plywood  

Posted by Nunya

Got the control panel laid out on on the plywood this weekend.
Also ordered the controls, a 3" trackball, 2 competition 8 way joysticks, and 32 various push buttons, all Happ controls.


Inside cabinet  

Posted by Nunya


Got the remaining glue removed and the inside sanded down.
Also went and purchased a 1/2 sheet of plywood to get started on the control panel.

Removed the extra interior boards, hello glue!  

Posted by Nunya

Nailed and glued in, had to pry the interior boards away far enough to fit a sawzall in there to cut the nails, but of course the glue kept clogging up the blade!
Cabinet minus boards by you.

Better picture of what my original game cabinet would have looked like.  

Posted by Nunya

Front panel and mirror removed  

Posted by Nunya

--------------------------
Sent from my mobile phone.

Cutting has begun  

Posted by Nunya

--------------------------
Sent from my mobile phone.